During the use of laser cutting machines, various problems often occur due to long continuous use, dusty working environment, improper operation by operators, etc. So how should such problems be dealt with? Let’s take a look below.
1. The device cannot be connected: whether the driver is installed on the computer, whether the USB cable or network cable is plugged in properly, check whether the USB cable or network cable is damaged, and whether the adapter is corroded;
2. There is no display on the panel after powering on: Check whether the power-on switch is damaged, whether the switching power supply is normal, and then check whether the display panel is damaged or whether the cable socket is aged;
3. Graphic deformation and cutting overlap during cutting: check whether the guide rail is loose, whether the motor is broken, whether the voltage is stable, and whether the machine’s system settings have been changed;
4. The equipment cannot be started or will trip when the circuit breaker is turned on: Check whether the emergency stop switch is pressed, whether the external power supply is connected, whether there is an abnormal snapping sound heard from the outside world, and whether the circuit is broken due to damage to the circuit and it will trip.
5. The high-voltage line is sparking: Pay attention to this problem. The line may be used for a long time. It is recommended to put a high-voltage insulating sleeve on the outside of the high-voltage line. In this case, the power must be cut off.
6. The size of the cut graphics is too large or too small: check whether the platform is flat and whether the material has been laid flat, so the air suction must be turned on during the cutting process to tighten the material until it is straight;
7. The light does not come out during cutting: first check whether the light switch is broken, whether the chiller is turned on and whether the return water is normal, because many of them now have protection devices, and the light will not come out without cooling water;
8. The guide rail does not rotate or moves weakly during cutting: Check whether there is any problem with the motor, the driver, and observe whether the bearings are rusty or stuck with foreign matter.
Laser cutting machines may also encounter various other problems in daily use. We will continue to update this aspect for everyone in the future.
DXTECH is a comprehensive enterprise integrating R&D, production and sales. With more than 12 years of experience in the laser industry. The main products include fiber laser cutting machine, laser engraving machine and laser marking machine, which can realize your metal or non-metal processing. The products are exported to more than 180 countries and regions including Europe and America. We are committed to providing integrated laser applications to users all over the world.
If you are interested in this machine, please contact us:
Cutting capacity 0.5mm-25mm, bending 1mm-10mm
E-mail: [email protected]